Pneumatic Accessories For Nex Flow Compressed Air Products

Pneumatic Accessories for the Nex Flow™ compressed air product line featuring Magnetic Bases, Swivel Fittings, Reclassifying Mufflers, Rigid Flex Hose, Electronic Temperature Control.


NEW Liquid Super Separator

Newly developed "Liquid Super Separator" is a new concept of a pneumatic mist remover without filter element. The "Element Free Pneumatic Water Separator" uses a special centrifugal technique with "radial multi-nozzles" that is world patent pending and makes it possible to reject liquid mist (water and oil) to 99.9%!

<<< Learn More >>>

Pneumatic Accessories,Magnetic Base,Swivel Fittings,Reclassifying Mufflers,Rigid Flex Hose,Electronic Temperature Control,Panel Coolers,Nex Flow

Magnetic Base

The Nex Flow™ Magnetic Base is used where the air operated products is required to be frequently moved. The extra strong magnet allows for flexible mounting, whether vertical or horizontal. Optional mini shut-off valve can be supplied.

Pneumatic Accessories Brochure - 5.56 MB

Electronic Temperature Control For Panel Coolers

Electronic Thermostat ELC (Electronic Control Digital Thermostat) is a way for precise control of one or two Nex Flow™ Frigid-X™ panel coolers.

  • Supply Voltage: AC120/240V

  • Sampling Rate: 4/sec (almost double that of nearest competitor)

  • Accuracy: 0.2% of full scale (under 10% of a degree)

  • 3 Outputs: Two relay outputs and one with PID, 1SSR output with PID to control external SSR

  • 50° to 100°C measuring range

  • It has two Alarm settings for the two output relays so you can set two different temperatures to control two different solenoids for two separate coolers (and can be used to control anything electrical)

  • AutoTune Mode for quick set ups

  • NEMA 4 Enclosure (ASS/PC), ULC approved - it is accepted anywhere in the world - Lexan door: U94-V-0

  • Standard unit comes with one solenoid valve, but it can operate two units and also complete additional tasks

  • °F or °C and easily switchable back and forth

Pneumatic Accessories,Magnetic Base,Swivel Fittings,Reclassifying Mufflers,Rigid Flex Hose,Electronic Temperature Control,Panel Coolers,Nex Flow

Swivel Fittings

High quality stainless steel swivle fittings for air nozzles, air jets, small air knives, and air amplifiers allow for a 25 degree movement from the center axis (50 degree total movement) to aim then secure in position the blow-off application.



Pneumatic Accessories Brochure - 5.56 MB

Pneumatic Accessories,Magnetic Base,Swivel Fittings,Reclassifying Mufflers,Rigid Flex Hose,Electronic Temperature Control,Panel Coolers,Nex Flow

Reclassifying Mufflers

Reclassifying mufflers provide excellent noise reduction - as much as 35 dBA - and more than sintered mufflers. In addition they are used to reduce oil mist.

The exhaust air from valves and cylinders may contain oil mist that can have a negative effect on the healthof employees. OSHA standard 29 CFR 1910 limits the cummulative exposure to tool oil mist 4.32 parts per million (PPM) in ay given eight hour work period.

The reclassifying muffler we provide uses a patented wrap design for the removable element that separates the oil from the exhausted air virtually trapping all oil in the element. Based on the input of 50 PPM ay 100 PSIG of oil, the exhausted oil mist is reduced to 0.016 PPM. A 1/4" tube can be attached to the bottom resorvoir where the oil accumulates to drain it.

Each reclassifying muffler is sized to pass a certain volume of compressed air with minimal restriction to avoid any effect on the operation of the cylinder or valve. For cylinders refer to the pdf file for our model numbers based on the bore size and stroke of the cylinder.


Pneumatic Accessories Brochure - 5.56 MB

Rigid Flex Hose

The unique Nex Flow™ Rigid Flex Hose is an all stainless steel hose that does not break after a few bends like competative rubber hoses with simple copper inserts. It is resistant to creep and crimping. Its all stainless steel construction allows its use in any difficult environment. The rigid flex hose has a 1/4" male NPT welded end connection and come in 6"and 12" lengths.

Pneumatic Accessories Brochure - 5.56 MB


info request button


Compressed Air Solutions To Meet Your Application Needs

About Nex Flow™

Nex Flow™ Air Products Corp. is a manufacturer of compressed air-operated products made to improve plant efficiency, improve energy efficiency, improve quality and enhance the environment. Our product line includes air blow-off products that reduce noise levels and compressed air use, and vortex tube technology using vortex tubes for spot cooling, control panel cooling, tool cooling and other unique applications. It also includes air operated conveying products and static control technology.


Our Products

Nex Flow™ Air Products Corp. is a manufacturer of Air Amplifiers, Air Knives, Air Jets, Air Nozzles, Air Operated Conveyors, Cabinet Panel Coolers, Industrial Housekeeping Products, Static Control Products, Vortex Tubes and Tool Coolers. Our brand names are Frigid-X™, Silent X-Stream™, X-Stream™, Air-Edger™, Ring-Vac™ and Air-Blade™.

Sample Content

Nex Flow™ Air Products Corp. provides an indepth information on Air Amplifiers, showing our Standard Air Amplifiers, Adjustable Air Amplifiers and Adjustable Gauged Air Amplifiers. Air Knives feature our Standard Air-Blade™ Air Knives, Stainless Steel Air-Blade™ Air Knife, X-Stream™ Air-Blade™ Air Knife and our X-Stream™ Hard Anodized Air-Blade™ Air Knife. Air Jets and Air Nozzles feature our Standard Air Jets and Nozzles, X-Stream™ Air Nozzles and our Air Edger™ Flat Jet Nozzle. Much more information on our product line is available on this web site.

Get in Touch

  • USA/Canada:
    (877) 797 2777
  • International:
    (416) 410 1806
  • Email:
  • USA Address:
    300 International Drive, Unit 100
    Williamsville, NY, 14221
  • Canada Address:
    10520 Yonge Street, Unit 35B-220
    Richmond Hill, ON
            L4C 3C7