|
It has to be understood that compressed air is a high cost energy source.
So there has to be a reason to use compressed air alternative
products. ANY amplification technology, when used properly can
get you excellent efficiencies. Because our compressed air products
are generally light weight, can be turned on and off rapidly (so
only used when necessary), and are low or no maintenance, their
efficient use overall contributes well to the overall productivity
of a production facility.
Optimization
Products General Brochure
To do this we offer two products for optimization:
|
 A
QUALITY ULTRASONIC LEAK DETECTOR
This device can be used to locate costly leaks in your
compressed air system. Eliminating compressed air leaks
can recover a tremendous amount of energy that can be used
to operate all types of nozzles, amplifiers and vortex tubes
with no added cost! Air savings means free energy. An Ultrasonic
Leak Detector (UDC) is typically a hand-held device that
is used to locate leaks by aiming it in the direction of
a suspected source of an air leak. When a leak is present,
then an audible tone can be heard via the use of appropriate
head-phones. The proper head phone is very important as
well as sensitivity in order to distinguish air leaks from
other phenomena which can be miss-interpreted, and even
made worse by potential false displays form and LED or other
type of display.
BEWARE OF CHEAP QUALITY
There is good quality and there is cheap quality. Be very
suspicious of low cost units because they may be very limited
in their use. Nex Flow offers a high quality unit at an
excellent price.
Learn
More
|
|
 A
DECENT FLOW CONTROL SYSTEM
All Nex Flow™ products are designed to improve plant
efficiency buy either reducing the compressed air used while
it is being used, or in some way to reduce maintenance,
or in another way to improve productivity. But the nice
thing about compressed air is that this energy comes from
"storage" and can be called upon only when needed.
The Nex Flow PLC Flow Control System (PLCFC) provides this
on demand control. It minimizes the use of compressed air
on any blow-off, cooling, conveying, drying or static control
system utilizing a photo electric sensor to turn the air
on and off as required.
MAKE SURE YOU KNOW WHAT YOU ARE GETTING
The Nex Flow™ PLC Flow Control System is not some
inexpensive simple box with a timer and low cost sensor
- it is far more.
Learn More
|
|
 AIR
FLOW METER
The X-Stream™ Air Flow Meter represents a radical
departure from conventional air flow meter designs, providing
easy installation, low cost and accurate of the probes in
the air stream.
The air flow meter clamps around a pipe with its probes
projecting into the pipe through drilled holes. The low
cost of the air flow meter makes it ideal for installation
at points throughout the air distribution system to track
valuable compressed air and assess system operation.
Learn More
|
|
 SOUND
LEVEL METER
X-Stream™ Sound Level Meter is used to measure and
monitor the sound level in all types of industrial environments.
Used for compressed air exhaust noise measurement it can
identify areas where costly and inefficient blow off can
be replaced by energy efficient Nex Flow™ blow off
products. In many instances, noise may be reduced by amplification
products as much as 10 dBA, to protect workers from excessive
and damaging noise levels and reduce energy use.
Learn More
|
|
