In many environments where the surroundings are
very quiet or if personnel are working next to control
panels, the Hot End and Cold End Muffing kits can
reduce the noise levels an additional 8 dBA depending
on air capacity used!!! The Hot End Muffler also
acts as an excellent heat guard over the hot end,
exhausting the hot air from the vortex tube cooler
assembly. Noise levels with the Nex Flow Panel
Coolers can be reduced to under 64 dBA or more depending
on capacity of the Panel Cooler.
HOT AND COLD END MUFFLING
KITS ON A PANEL COOLER REDUCE NOISE LEVELS UP TO
AN ADDITONAL 8 dBA.
IN ADDITION THE HOT END MUFFLER ACTS AS A HEAT GUARD.
End Muffling Kit
The Cold End Muffling Kit consists of a silencer
and all necessary fittings to connect to the Panel
Cooler at the cold air outlet inside the electrical
control panel. Depending on the capacity of the
specific Panel Cooler, the dBA reduction offered
by the Cold End Muffling Kit is 5 to 6 dBA. Easy
to install. Can be installed with the silencer vertical
or horizontal depending on the space.
End Muffling Kit & Heat Guard
Hot End Muffling Kit consists of an ABS Plastic sleeve
with silencing material fitted over the hot end of
the Panel Cooler, outside of the control panel. The
dBA reduction offered by the Hot End Muffling Kit
is 2 dBA. Easy to install just fit over the
top of the Panel Cooler. In addition to noise reduction
it offers additional protection from the hot end of
the Panel Cooler.