Pneumatic Water Separator - Pneumatic Mist Remover From Nex Flow
developed "Liquid Super Separator" is a new
concept of a pneumatic mist remover without filter element.
The "Element Free Pneumatic Water Separator"
uses a special centrifugal technique with "radial
multi-nozzles" that is world patent pending and
makes it possible to reject liquid mist (water and oil)
to 99.9%! This pneumatic mist separator is virtually
maintenance free, as there is no need to replace any
filter element. A standard traditional filter with an
element and automatic drain may be placed downstream
to control micron size but the high liquid and mist
removal of the separator will keep it clean and it may
not require element replacement for an extended period
of time. Maintains extremely low pressure drop.
high pressure units, manual drain types, super large versions
and miniature versions can be requested.
The Super Separator
Very large water separators sometimes used upstream to remove liquid but it does not prevent downstream condensation due to the temperature difference between the inside and outside of the compressed air line.
The X-Stream Super Liquid Separator
is installed at the end of a compressed air main line
before a branch line, or just before the outlet of air
use for the complete rejection of the mist due to the
condensation inside the pipe and also remove any oil mist
to 99.9%. This makes it possible to get an essentially
maintenance free operation in the control of water and
moisture in air line. The only possible part change would
be the replacement of the auto drain valve giving the
unit a semi permanent life time.