The 316L STAINLESS STEEL Reversible Drum Angel/
Drum Pump / Reversible Drum Vac is a maintenance free system
to recover spilled liquids, coolant, sludge, tramp oil, waste
water and other liquids using only compressed air. The compressed
air system attaches easily to any closed head of a drum (30
or 55 US gallon, or 45 Imperial gallon or 205 liter drum).
The reversible feature allows you to fill or empty the drum
in under two minutes with the simple turn of a knob. The flow
rate can be controlled either by a shut-off valve or regulator,
or by the knob itself. Drum should have a nominal wall thickness
of 1.5mm (16 gauge) and in good condition to maintain integrity
of system performance and safety. Using no electricity, these
systems last and last, unlike many electrical units that wear
out quickly in harsh industrial environments. A built in safety
feature prevents overfilling and spills.
The 316L Stainless Steel Drum Angel Model 35011S includes
the Drum Angel unit, crevice tool, heavy duty skimmer tool,
floor tool, two (2) straight plastic wands, metal wand for
sure with heavy duty skimmer tool, 10 of plastic hose
with cuffs and drum adaptor with plastic tube. OPTIONAL all
316L stainless drum adaptor and tool available on request
at extra cost. Contact representative.
Pump and drum hand pump and barrel pump and electric drum
The Nex Flow Drum Angel is an effective Drum Pump or
Barrel Pump to replace a breakable electric drum pump and
is far superior to a slow, cumbersome drum hand pump.
Filter Separator Installation & Maintenance:
Drain Filter Separator Installation & Maintenance - Full
instructions are provided with each unit when shipped.
Drain Filter Separator:
Automatic Drain Filter Separator is recommended with all
Nex Flow products.
Liquid Transfer Systems are mostly electric operated with
motors that can wear out and can be easily damaged in wet
and dirty environments. The stainless steel Drum Angel has
no electrical parts to worry about.
Drum Angel Features
Compressed air enters at point (A) and into the
Drum Angel unit (B) which is mounted onto a sealed metal drum
via the small hole. An adjustable knob (C) controls whether
he unit creates a vacuum inside the drum to fill the drum or
pressure to empty the drum. The liquid enters or fills the drum
through a tube assembly (D) inserted and threaded into the large
drum hole. An elbow attachment (E) connects the tube assembly
to the hose and attachment assembly (F) which collects or dispels
the liquid. Various attachments are available for liquid collection