High Voltage Power Supply: Haug Multistat, Haug EN 92 EX, Haug S Line
Voltage Power Supply EN-C (Two Outlet) EN-C4 (4 Outlet) Static control power supply EN-C type High
Voltage Power Pack. The integrated high voltage converts
applied mains voltage to approx. 7000 to 8000 volts.
The unit is equipped with two or four high voltage
terminals and integration On/Off pilot lamp.
Power supplies are equipped with a modular type high voltage
transformer. It consists of three main modules, all
of which can be replace individually. The unit is
electrically approvedfor North American instalations.
Line Power Supply EN SL The S Line power supply comes with two
high voltage connections and meets both North American
and European standards. The integrated high voltage
power supply converts applied mains voltage to approx.
7000 to 8000 volts. Integration On/Off pilot lamp.
The S Line power supply EN SL LC is the same as the EN SL but
with integrated full electronic function monitoring
to constantly monitor all functions of the ionizing
system. It alerts the operator of an irregularities
by causing the LED indicator integrated in the housing
The S Line EN RLC is identicalin all aspects to the EN SL LC
plus a signal socket above the earthing sleeve. A
fault message can be connected to the signal socket.
Multistat Power Supply
The Multistat power pack in combination with HAUG ionizing units
is intended for the removal of electrostatic charges.
The mains voltage is transformed by the Multistat
to an output voltage of 78 kV~ for the operation
of HAUG ionizing units.
Special features and advantages
Self-balancing high-voltage; no adjustment or settings on the Multistat are required
Indication of the output high-voltage by means of an analogue indicating instrument
Fault indication in case of insufficient output voltage by means of an optical signal (light-emittting diode - LED) and a floating changeover contact
Fault indication in case of insufficient mains voltage by means of a floating changeover contact
he floating changeover contact allow both status check and an error check to be performed
The Multistat allows the integration of the fault signals into a quality assurance system
The high-voltage plug-and-socket connector system X-2000 ensures a secure connection. The assembly of the connector is straightforward and does not require any tools
Four high-voltage terminals allow up to four HAUG ionization units to be connected
92 EX Power Supply The EN 92 EX power supply is suitable for
direct use in areas with potentially explosive atmospheres
(zones 1 or 2).
The units comply with the international standard ATEX directives.
All high voltage components are accomodated in a flameproof
housing. The EN 92 EX power supply is equipped with
two high voltage ports for the connection of the ionizing
units. No long high voltage cables are required, as
the power supply can be installed in the imediate
vicinity of the ionizing unit.