Explosion Proof Static Bars and Power Supplies
for areas with potentially explosive atmospheres (ex zone).
For many years, HAUG has been a competent manufacturer of ionizing units
approved for equipment in areas with potentially explosive atmospheres.
These are intended to eliminate unwanted electrostatic charges
in areas where hazardous gases may form, such as paint plants
or printing machines.
Graphical industry: Screen, tampon and offset printing machines etc.
Paint shops: automotive paint applications, painting
of plastic parts, etc.
Ionizing bar EI Ex T
The design of the ionizing bar EI Ex T complies with the International
ATEX directivities. In combination with the power pack EN 92
Ex or Multistat Ex, it is suitable for use in manufacturing
locations with potentially explosive atmospheres resulting from
gases of explosion group IIA, temperature classes T4 to T6.
EI Ex T
By installing the ionizing bar in a suitable body, a compressed-air
assisted ionization system can be created. This air blade is
particularly suitable for blowing-off processes on plate and
web material or where installation is difficult, e.g. in the
case of distances further away from the material.
ILLUSTRATION EI ex T:
is a modern high-voltage power pack with fully electronic watchdog
function. It is fitted with an automatic fault alarm, an analog
display for high-voltage monitoring and an output jack for the
connection of peripheral alarm units.
This power pack must always be installed outside the potentially
explosive atmosphere. It is approved for the operation of ionizing
bar EI Ex T.
DATA Multistat Ex (Subject to technical changes!):
ILLUSTRATION Multistat Ex :
pack EN 92 Ex
Power pack EN 92 Ex is suitable for direct use in areas with potentially explosive atmospheres (zones 1 or 2).
The units comply with the ATEX directives. All high-voltage
components are accommodated in a flameproof housing. The power
pack EN 92 Ex is equipped with two high-voltage ports for the
connection of the ionizing units. No long high-voltage cables
are required, as the power pack can be installed in the immediate
vicinity of the ionizing unit.
The power pack EN 92 Ex has been approved for operating the
ionizing bar EI Ex T.
DATA EN 92 Ex:
ILLUSTRATION EN 92 Ex: