Air Wipe Blow-Off System - Ring-Blade™ from Nex Flow™
|
It produces a “laminar” flow of air along its 360º angle using the “Coanda” effect which “entrains” a large volume of air from the surrounding area along with the small amount of compressed air from the Ring-Blade™ air-saver wiper-blade to produce an output flow up to 30 times. Air Wipe Blow-Off System - Ring-Blade™ pay back on compressed air savings can be as soon as a few weeks in some applications when compared to nozzle “rings” or simple annular slots used by other air wiping systems. Blow-off, cool & clean items like pipe, cable, wire and hose with the Air Wipe Blow-Off System Ring-Blade™ from Nex Flow™. Ring Blade™ Air Wipe
Compressed air enters at point (A) into an annular chamber and throttled through a small ring nozzle at high velocity. This air stream clings to the coanda profile directing the air stream down toward the surface which is angled to create a “cone” style directed force to best clean, wipe and dry a surface. The surrounding air is entrained at point (B) creating an amplified 360 degree conical airflow at point (C) to uniformly wipe the surface of the of the material running through the Ring Blade TM. The wet or dirty material (D) direction of travel is against the flow.
Specifications  Available
in five standard (inside) diameters:
Special diameters for the Air Wipe Blow-Off System - Ring-Blade™ are available on special request from Nex Flow™. Air Wipe Blow-Off System - Ring-Blade™ comes with a standard .002" outlet gap which will work for 90% of all applications encountered. If greater force is required, a second .002" (.05mm) shim may be installed to open the gap for greater flow. Materials of construction aluminum. See Ring-Blade™ Air Wipe Blow-Off System: |
Air
Wipe Blow-Off System - Ring-Blade™ from Nex Flow™
is easy to mount and maintain and reduces both compressed
air consumption and noise levels.
