Air Nozzles And Air Amplifying Nozzles For Blow-Off And Drying Applications From Nex Flow
Air Nozzles are the smallest amplifiers for point applications.
Air Jets entrain large volumes of surrounding air through the Jet (similar to Air Amplifiers) and are more efficient than Air Nozzles. They cover a larger blowoff target than an Air Nozzle.
The larger the Air Nozzle the greater the efficiency for flow amplification and significant energy savings can be achieved. It is important to recognize that amplification Air Nozzles are “flow” amplifiers and not force amplifiers. However the more air consumed the greater the force produced.
The most important reason to use Air Nozzles or Air Jets is safety. All Nex Flow™ Air Nozzles meet OSHA standard CFR 1910.242(b) for dead end pressure. Noise levels are dramatically reduced with Air Nozzles in addition to lower energy use.
Air Nozzles are available in aluminum, 304 stainless and 316L stainless steel material.
Nex Flow™ removes the confusion from Air Nozzles. You do NOT need hundreds of different air nozzles. All air amplifying nozzles produce air flows up to 25 times the compressed air consumed. Different Air Nozzles have different outlet sizes and the more air used, the greater the force produced. Noise reduction up to 10 dBA as well as reduced air consumption when compared to open Jets and Tubes. By maintaining a reasonable choice of air nozzles most valid applications can be addressed with our range.
Nex Flow™ Air Nozzles are designed to fit into small spaces. We have an adjustable Air Nozzle for some applications and then a few different Air Nozzles with varying force, depending on the application.
Nex Flow™ Air Nozzles Models Products Line
is a small brass air nozzle (air amplifying nozzle) to fit into small spots and used by many machine builders for blow-off applications.
Model 47002 is the small Model 47001 brass air nozzle (air amplifying nozzle) added to a copper tube. Machine builders can bend the copper tube and aim the nozzles to where ever it suits. The copper tube is simply press fit into the customers system.
Model 47003 (Anodized Aluminum), 47003S (303/304 Stainless Steel), 47003S-316L (316L Stainless Steel) This is a common standard strength air nozzle (air amplifying nozzle) with a 1/8 male NPT connection and ideal for most blow-off applications involving liquids. The coanda profile is made for excellent noise reduction and blow-off force at a good distance.
Model 47004 (Anodized Aluminum), 47004S (303/304 Stainless Steel), 47004S-316L (316L Stainless Steel) This is another common but stronger force air nozzle (air amplifying nozzle) with a 1/4 male NPT connection and ideal for most blow-off applications involving liquids and even light weight parts. Again the coanda profile is made for excellent noise reduction and blow-off force at a good distance.
Model 47009 (Anodized Aluminum), 47009S (303/304 Stainless Steel), 47009S-316L (316L Stainless Steel) This is similar to the 47003 except it is made adjustable. The Superior design of the adjustable set screw is made to adjust the nozzle within its weakest and strongest ranges.
Model 47010 This air nozzle (air amplifying nozzle) is a unique design by Nex Flow and is extremely powerful and one of the strongest nozzles on the market today. It has a ¼ female NPT fitting and is fully anodized for long life. With the coanda profile you get an extremely strong force at a distance. This is an ideal nozzle for blow guns and for blowing small parts for part ejection as well for stronger blow-off of liquids if required, especially heavier viscosity liquids.
Air Nozzle Models 47001, 47002, 47003, 47003S, 47003-316L, 47004, 47004S, 47004S-316L, 47009, 47009S, 47009S-316L Compressed air enters at point (A). Surrounding air (B) is entrained over a specially designed profile surface by the action of the small amount of compressed air leaving the ring gap at point (C). This results in a concentrated high velocity, laminar flow stream of amplified air with maximized force.
Nex Flow Air Nozzles How They Work
Model 47010 X-Stream Air Nozzle - Compressed air enters at point (A). Surrounding air (B) is entrained over a specially designed profile surface by the action of the small amount of compressed air leaving the small drilled holes at point (C). This results in a concentrated high velocity, laminar flow stream of amplified air with maximized force.
Nex Flow Air Nozzles Performance
@ 80 psig
Force in ounces
Force in Grams
Brass Mini-Nozzle with 10/32 fitting or metric equivalent
Brass Mini-Nozzle with copper tube - male
Standard Aluminum 1/8" NPT male fitting
Extra Strong Aluminum 1/4" NPT male fitting
Adjustable Aluminum nozzle with 1/8" male NPT fitting - can be
set to minimum and maximum with set screw
X-stream Strong Force nozzle with 1/4" female NPT fitting
Rigid Flex Hose Nozzle Accessories
The unique Nex Flow Rigid Flex Hose is an all stainless steel hose that does not break after a few bends like competative rubber hoses with simple copper inserts. It is resistant to creep and crimping. Its all stainless steel construction allows its use in any difficult environment. The rigid flex hose has a 1/4" male NPT welded end connection and come in 6"and 12" lengths.
Compressed Air Solutions To Meet Your Application Needs
About Nex Flow
Nex Flow Air Products Corp. is a manufacturer of compressed air-operated products made to improve plant efficiency, improve energy efficiency, improve quality and enhance the environment. Our product line includes air blow-off products that reduce noise levels and compressed air use, and vortex tube technology using vortex tubes for spot cooling, control panel cooling, tool cooling and other unique applications. It also includes air operated conveying products and static control technology.
Nex Flow Air Products Corp. is a manufacturer of Air Amplifiers, Air Knives, Air Jets, Air Nozzles, Air Operated Conveyors, Cabinet Panel Coolers, Industrial Housekeeping Products, Static Control Products, Vortex Tubes and Tool Coolers. Our brand names are Frigid-X, Silent X-Stream, X-Stream, Air-Edger, Ring-Vac and Air-Blade.
Nex Flow Air Products Corp. provides an indepth information on Air Amplifiers, showing our Standard Air Amplifiers, Adjustable Air Amplifiers and Adjustable Gauged Air Amplifiers. Air Knives feature our Standard Air-Blade Air Knives, Stainless Steel Air-Blade Air Knife, X-Stream Air-Blade Air Knife and our X-Stream Hard Anodized Air-Blade Air Knife. Air Jets and Air Nozzles feature our Standard Air Jets and Nozzles, X-Stream Air Nozzles and our Air Edger Flat Jet Nozzle. Much more information on our product line is available on this web site.