Nex Flow removes the confusion from air jets and nozzles.
You do NOT need hundreds of different nozzles.
All air amplifying nozzles produce air flows
up to 25 times the compressed air consumed.
Different nozzles have different outlet sizes
and the more air used, the greater the force
produced. Noise reduction up t0 10 dBA is typical
as well as reduced air consumption when compared
to open jets and tubes.
The most important reason to use air nozzles or jets is safety
All Nex Flow air nozzles and jets meet OSHA
standard CFR 1910.242(b) for dead end pressure.
Noise levels are dramatically lower with air
nozzles and jets in addition to lower energy
Air Nozzle Cluster: An Air Nozzle Cluster can use a large amount
of compressed air. A cluster of air jets can
be much more efficient by using less compressed
air and with just as much energy for blowoff.
Air Nozzles (air amplifying nozzles) are the smallest amplifiers for point applications.
||X-Stream Air Nozzles
Nex Flow nozzles are designed to fit into small spaces. We have an adjustable nozzles for some applications and then a few different nozzles with varying force, depending on the application.
Air jets entrain large volumes of surrounding air through the jet (similar to air amplifiers) and are more efficient than air nozzles. They cover a larger blow-off target than a nozzle.
||Air Edger Flat Jet Nozzle
Air Edger Flat Jet is an extremely efficient flat jet air nozzle designed to provide a powerful stream of high velocity laminar flow and high force for blow off and cooling where air knives may not be enough.